 |
|
| Now included with each new Sodick Wire EDM machine equipped with an LP control |
Whether you use your wire EDM machine for small lots of sub-micron precision parts or as a workhorse for production machining, get the most out of your machine tool investment. Dramatically simplify the part-programming process, significantly increase part accuracy, and greatly reduce the length and complexity of your G-code program with ESPRIT.
|
Existing ESPRIT for Sodick customers Register
here
| The ESPRIT CAM System for sodick Includes: |
- ESPRIT SolidWire Platinum Plus for 2-5 axis wire EDM
- 2-axis contouring
- 3-axis tapering and advanced conics
- 4-axis XY, UV machining
- 5-axis control
- Automatic feaure recognition
- Machine specific user interface for Sodick
- Factory certified post processing for Sodick
- Integrated cutting data reader for Sodick
- Solid simulation and verification for Sodick
- and more as outlined in the ESPRIT General Specifications
|
| The ESPRIT CAM system for Sodick is a full commercial license of ESPRIT software which is included with Sodick LP equipped machines. ESPRIT for Sodick runs offline on a PC and provides the full power of ESPRIT’s programming functionality for Sodick Wire EDM machines. |
|
| The ESPRIT Family |
ESPRIT for Sodick is a member of the ESPRIT family of CAM software which also includes powerful, full-spectrum programming for
- 2–5 axis milling*
- 2–22 axis turning*
- 2–5 axis wire EDM
- multitasking mill-turn machining*
- B-axis machine tools*
- High-speed 3- and 5-axis machining*
*Available as an upgrade to the ESPRIT for Sodick system. Wire EDM upgrades are also available to support other EDM makes and models.
|
|
|
|
Extrusion Die programmed in 4-axis using ESPRIT FX technology for Sodick...
flash movie
3-axis tapering with variable land...
flash movie
Sodick specific user interface used to program a die plate...
flash movie
Open 2-axis contouring
Machine Specific user interface for Sodick
|
